ENVO D35 - Page 31

ENVO D35 | ST EBIKE MANUAL | VERSION 1.0 31
The default settings of the bike are shown in the picture. Using the system menu, you can choose
between metric and imperial units. The brightness of the LCD display can be set between 1-5
level. The Auto-off function turns off the display after a set value of minutes. You can also turn it
off to keep the display on indenitely. The battery indicator shows the battery level in voltage and
percentage, and you can also choose to turn this off. The self-testing menu gives you the option to
run a self-test on the ebike components, i.e., Controller, PAS sensor, speed sensor, throttle, motor
hall sensor, and brake sensor. In the clock option, you can set the day, date, and time.
The wheel size refers to the rim diameter; the supported range is 12-31 inches. The battery voltage
has 24V,36V,48V options along with a user-dened value option. The start password gives you the
ability to enable a password when turning on the ebike. Factory settings can help reset the factory
settings, and the information menu gives you information on the ebike statistics.
Figure 5C
Figure 5D