22
GA0383P02 Rev. C
· VIEW FLOW Select this item to display the ambient or generator airflow in liters per
minute. Press the up or down arrow keys to toggle between the ambient airflow and the
generator airflow.
Log Menu
· SHOW FAULTS LOG Select this item to view the faults log. See About the Fault Log for
more information.
· CLEAR FAULTS LOG Select this item to clear the faults log. When selected, the
CLEAR FAULTS LOG prompt will flash for two seconds before clearing the faults log. If
the FN key is pressed while it is still flashing clearing of the log will be canceled. See
About the Fault Log for more information.
· SHOW POWER LOG Select this item to view the power log. See About the Power Log
for more information.
· CLEAR POWER LOG Select this item to clear the power log. When selected the
CLEAR POWER LOG prompt will flash for two seconds before clearing the power log. If
the FN key is pressed while it is still flashing, clearing of the log will be canceled. See
About the Power Log for more information.
· SHOW PROGRAM ID Select this item to display the program identification and revision
level in the format GCM-A Rev X.X. This manual was written for software version 1.7A-
8.
(View Menu, cont’d)
To Next Page
Loading...