REV. 09/2020
B11
1.2 Truck use and operation
1.2.1 Preparation for use
The following are inspection and preparation operations that must be implemented before the truck
is put into daily use.
Operator's Daily Checklist
Date
Truck No.
Department
Runtime
Meter Reading
Operator
No.
Table 1. Table of daily inspections by operators
Daily Check Items O.K.(√) Remark
Check for Fluid Leakage
Check for scratches, deformation or cracks.
Check Decal Condition
Check the battery bottom connector pins
Check the smooth movement of the wheels.
Check the function of the emergency brake
by activating the emergency disconnect switch.
Check the control hand Mechanical operating braking function.
Check the lifting and lowering functions by
operating the buttons.
Check display equipment, alarm system
and safety devices.
Check the vertical creep of the truck.(if equipped)
Check the chassis frame and apply grease
as required. Check the position reset function of the operating
handle.
Visually inspect the battery and recharge the battery(if
equipped)
Visually inspect the bolts and nuts
Visually inspect if there are any broken hoses or broken electric
wires.
Perform a visual inspection for integrity, defor-
mation,damage with connector pins at the bottom of the
battery.
To Next Page
Loading...
