ep EPL154 - Using the Truck on a Slope

REV. 09/2020
B24
Be particularly careful near slopes:
Never attempt a slope with a gradient
greater than that specied in the truck’s
data sheet. Make sure that the ground
is dry with a non-slip surface and that
the route is clear.
Ascending slopes
Always ascend slopes travelling in the
reverse direction, with the load facing
uphill. Without a load, it is recommend
to ascend slopes forwards.
Descending slopes
Travel down slopes must always be
forwards, with the load uphill. Without
a load, it is recommended to descend
slopes forwards. In all cases, travel at a
very low speed and brake very gradua-
lly.
1.2.9 Using the truck on a slope
Incorrectuseofthetruckonslopes
places stress on the traction motor,
brakesandbattery.
Risk to life and/or risk of major
equipmentdamage.
Neverparkthetruckonaslope.
Never make a U-turn or take shortcuts
onaslope.Onaslope,theoperator
mustdriveveryslowly.
Starting on a slope
If you have to stop and then start on
slope, proceed as follows:
•
Stop on the slope by pressing the
accelerator in the opposite direction
until the machine comes to a standstill.
•
Return the accelerator to the neutral
position, then release the accelerator
control button to apply the parking
brake.
•
To restart, press the accelerator button
for the desired direction.
•
The truck will move.
i
NOTE
DANGER