ep EPL185 - Page 25

REV. 09/2020
B7
2.Key switch B
Connect and interrupt the control
current.
•
When pulling out the induction key, the
control current of the truck will be interrupt-
ed;
• When inserting the induction key, the control
current of the truck will be connected.
Pulling out the key switch of a forklift
before leaving can prevent the forklift
fromstartingaccidentally.
WPL201
i
NOTE
1.1.4 Display instrument
• LED (1) displays the remaining charge;
• LED (2) displays remaining charge
percentage;
• LED (3) displays Interlock switch status
indication;
• LED (4) displays the total running time
normally. If fault, display the fault code.
1
2
3
4
70％
EPL151/EPL185
EPL154
• LED (1) displays the remaining charge;
• LED (2) only display full working hours
normally. If fault, display the fault code for
display instrument and lithium-ion battery;
• LED (3) ashing, and the vehicle starts
timing;
• LED (4) is on, indicate vehicle failure;
• LED (5) is on under normal, it will ashing
when the power is less than 20
％
;