Epever MT Series User Manual

CAUTION: Set the voltage of the “User” battery type via PC software only.
1) Lead-acid Battery Control Voltage Parameters
The parameters are in the 12V system at 25 ºC. Please double the
values in the 24V system.
Battery type
Voltage parameter
Sealed
Gel
Flooded
User
Over Voltage Disconnect Voltage
16.0V
16.0V
16.0V
9~17V
Charging Limit Voltage
15.0V
15.0V
15.0V
9~17V
Over Voltage Reconnect Voltage
15.0V
15.0V
15.0V
9~17V
Equalize Charging Voltage
14.6V
——
14.8V
9~17V
Boost Charging Voltage
14.4V
14.2V
14.6V
9~17V
Float Charging Voltage
13.8V
13.8V
13.8V
9~17V
Boost Reconnect Charging Voltage
13.2V
13.2V
13.2V
9~17V
Low Voltage Reconnect Voltage
12.6V
12.6V
12.6V
9~17V
Under Voltage Warning Reconnect
Voltage
12.2V
12.2V
12.2V
9~17V
Under Volt. Warning Voltage
12.0V
12.0V
12.0V
9~17V
Low Volt. Disconnect Voltage
11.1V
11.1V
11.1V
9~17V
Discharging LimitVoltage
10.6V
10.6V
10.6V
9~17V
Equalize Duration (min.)
120
——
120
0~180
Boost Duration (min.)
120
120
120
10~180
NOTE:
1) When the battery type is sealed, gel, flooded, the adjusting range of
equalizing duration is 0 to180min, and boost duration is 10 to180min.

Epever MT Series Specifications

General

Brand	Epever
Model	MT Series
Category	Measuring Instruments
Language	English