Epever MT Series - Fault Indication

WARNING: The required accuracy of BMS shall be at least 0.2V. If
the deviation is higher than 0.2V, the manufacturer will assume no liability for
any system malfunction caused by this.
6.6 Fault indication
Fault
Fault
indicator
Charge
indicator
LCD
Instruction
BATT2
overvoltage
Red
Fast
flashing
——
Battery level
shows full, battery
frame blink, fault
icon blink.
BATT2
over-
discharged
——
——
Battery level
shows empty,
battery frame blink,
fault icon blink.
BATT2 over
temperature
Red
Fast
flashing
——
Battery level
shows current
capacity, battery
frame blink, fault
icon blink, the
temperature icon
blink.
BATT2
system
voltage
error
①
Red
Fast
flashing
Green
Fast
flashing
Battery level
shows empty,
battery frame blink.
① No alarm for limited voltage fault when using Lithium batteries.