Epever MT Series - Battery Type

6.5 Battery type
1)Operation:
Step1: Press the button and hold 5s under the battery type interface.
Step2: Press the button when the battery type interface is flashing.
Step3: Press the button to confirm the battery type.
2) Battery type
BATT112V Sealed
BATT124V Sealed
BATT112V Gel
BATT124V Gel
BATT112V Flooded
BATT124V Flooded
LiFePO
4
(4S)
LiFePO
4
(8S)
Li-NiCoMn (3S)
Li-NiCoMn (6S)
User
CAUTION:The battery voltage is set as default and not changeable
when selecting the default battery type. Please change to “User” battery type
before adjusting the battery voltage.