When the battery type is selected as the lithium battery (LiFePO4 and
Li(NiCoMn)O2 series), the "Temp Comp. Coeff " and the "Rated Voltage" cannot
be set. The software automatically enables the protection function of "Low
temperature prohibits charge and discharge."
3) Voltage parameters
Battery voltage parameters
The below parameters are measured in the condition of 12V/25ºC. Please double
the values in the 24V system and multiplies the values by 4 in the 48V system.
Over voltage disconnect voltage
Over voltage reconnect voltage
Equalize charging voltage
To Next Page
Loading...
