119
CERTIFICATION
HPAC 2.0’s cooling/heating capacity is sufficient to cool/heat the room it is located in.
HPAC 2.0 is mounted level and flush to the wall.
HPAC 2.0’s interior vents are not blocked by any furniture, plants or window coverings.
Anti-lifting bracket is secured.
Power receptacle is in good working condition and LCDI plug fits tightly.
Circuit breaker is within specifications required.
Condensate drain is connected and working (if using for heating).
External condensate drain (if applicable) is pitched correctly.
External condensate drain’s exterior wall puncture is properly sealed.
External vent holes are 100% aligned internally with the HPAC 2.0’s vents holes.
Exterior vents are not blocked by walls or plantings.
Exterior grilles are installed correctly.
Exterior grilles are properly sealed.
HPAC 2.0 INFO CERTIFICATION INFO
Serial Number Technician Name
Installation Address Technician ID Num-
ber
Dealer Date
Invoice Date Signature
The HPAC 2.0 below has been inspected and certified to be in compliance with installation requirements of Ephoca.
The warranty is only valid if this certification is complete and
signed by an Ephoca technician.
ATTENTION
To Next Page
Loading...
