Ephoca HPAC 2.0 User Manual

38
STEP 1 Turn off the HPAC 2.0 and wait one hour for it to cool down.
STEP 2 Locate the filter inside the top part of the HPAC 2.0.
STEP 3 To remove the filter, lift the air grille on the top and then remove the filter.
Be ca reful not touch the m etal p a rts of th e HPAC 2.0 w hen rem ovi n g
the filter. They are sharp and may cause injury.
ELECTRICAL SHOCK HAZARD
Do not insert hands or other objects through the air inlet during
operation . Electrical and moving parts could cause shock and injury.
Failure to follow this warning can result in property damage, injury
and/or death.
WARNING
CAUTION
CLEANING THE FILTERS
To maintain optimal performance, clean the filter at least once a month. Clogged and dusty filters reduce the
cooling and heating capability, restrict airflow and can lead to extensive damage to the HPAC 2.0. Keeping the
filters clean saves energy and will reduce the risk of component failure.

Ephoca HPAC 2.0 Specifications

General

Brand	Ephoca
Model	HPAC 2.0
Category	Heat Pump
Language	English