77
SCHEDULING
This section is dedicated to the weekly scheduling of the HPAC 2.0.
STEP 1
This option is possible only if remote control has been confi gured
(see page 81 to enable remote control).
Scheduling is in 30-minute increments. It is not possible to set exact
times.
By selecting the “Scheduling” item, you access the HPAC 2.0 calendar scheduling
feature. By clicking “Edit” on a day of the week, you can add and defi ne one or more
startup and shutdown periods for the HPAC 2.0 during that day, by clicking on the “+”
symbol.
ATTENTION
ATTENTION
To Next Page
Loading...
