EasyManua.ls Logo

Epiroc HM Series - Impacting;Chopping; Use under Water; Cylinder End Positions

Default Icon
52 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Safety and operating instructions
34 © Construction Tools GmbH | 3390 5149 01 | 2020-09-22
Original Instructions
6.5.5 Impacting/chopping
n
Do not use the hydraulic attachment to impact or
chop to destroy material.
This would seriously damage the hydraulic attach-
ment.
6.5.6 Use under water
n
Never use the hydraulic attachment under water.
This would seriously damage the hydraulic attach-
ment and may damage the whole hydraulic installa-
tion.
6.5.7 Cylinder end positions
n
Reposition the carrier to avoid working with the cylin-
der in its end positions.
Avoid operating the hydraulic attachment when the
carrier stick and bucket cylinder are in one of their
end positions. These end positions have damping fa-
cilities; the hydraulic cylinder may be damaged by
prolonged use while in its end positions.

Table of Contents

Related product manuals