Epoke SKE8 User Manual

epoke
®
500481
GB-0305.1
Instruction manual
SKE
Valid from ident. no. xxxx0200
If you have technical questions please state ident. no., which is on the machine sign. We recommend that you write this
number here:
Type: ..................................................
Year: .................................................. Ident. no.: .............................................
Valid from ident. no.:
SKE 8 10010200
SKE 12 10030200
SKE 15 10040200
SKE 20 10050200
Published and printed by
Epoke
®
A/S,
Documentation department
Changes of technical details in relation to specifi-
cations and sketches in this instruction are subject
to alteration.
This instruction answers important questions regar-
ding safety, operation, maintenance and technical
data.

Epoke SKE8 Specifications

General

Brand	Epoke
Model	SKE8
Category	Spreader
Language	English

Summary

Model, Compliance, and Specifications

EU Conformity and Applied Standards

General Descriptions and Hazards

Transport, Handling, and Use Restrictions

Machine Hazards Overview

Outlines the various hazards presented by the machine.

Safety Measures and Lubrication

Hazard Details and General Safety Measures

Permitted Weights and Specific Safety

References permitted total weight and safety measures for specific operating conditions.

Technical Data

Detailed Technical Specifications

Comprehensive technical data for different SKE models.

Preparation, Operation, and Troubleshooting

Connecting and Disconnecting the Spreader

Remote Control and Operating Levers

Guidance on operating the remote control and using the operating levers.

Initial Operation and Quantity Adjustment

Procedures for initial operation and adjusting the spreading quantity.

Failure Diagnosis and Repair Instructions

Troubleshooting common failures and providing repair and assembly instructions.

Maintenance and Inspection

Cleaning, General Maintenance, and Storing

Instructions for cleaning, general maintenance, and storing the spreader.

Mechanical Inspection List

Detailed inspection list for mechanical components with intervals and checks.

Control, Testing, and Tyre Information