Epoke SKE8 - Failure Diagnosis and Repair Instructions; Maintenance and Inspection; Cleaning, General Maintenance, and Storing

12
epoke
®
SKE8-12-15-20
GB-0305.1
2.3.2 Dimensioned sketch
SKE15, SKE20
SKE8, SKE12
2.4 Diagrams
2.4.3 Electrical diagram
Electrical diagram, see spare parts manual.
2.5 Corrosion protection
All Epoke-products were sandblasted with steel balls, zinc
dusted with 1-component epoxyester (does not apply to
non-corrosion-resistant components), first coated with 2-
component polyurethan and varnished with 2-component
polyurethan varnish.