2.1.3.5 Suggestions for a user guide
For a safe operation, the employer has to make
a user´s guide.
Employer is required to equip the tool with various devices
and make all necessary arrangements which correspond
to the applicable safety instruction, technical and medical
regulations.
The employer has to instruct the users of the dangers,
which may arise from operation with the tool and
precautions which must be made, and thereafter the
instruction must be repeated at regular intervals, at least
once a year.
The employer can fulfill this requirement by providing a
user´s guide. Please be aware of the legislation concer-
ning the safety area.
You may pass on the following instructions/information of
the operation to your staff e.g.:
• Normal/permitted usage
• Abnormal usage
• Safety in public traffic
• The user must be aware of, that his/her presence in the
danger zone (working area) is forbidden.
• Information of safety devices.
• If a fault/defect arises in the equipment in the equipment
which may present a risk/danger to the insured parties,
the equipment must be stopped.
• First aid instructions
• Operational safety
• Reference to faults and their rectification
• Instructions regarding the warning instructions
• Permissible operating data
• Environmental protection
• Supervision during use
• Servicing
• Maintenance
• Repair work on load-bearing and other technical parts
relating to safety.
2.1.11 Lubricating grease
Long-term or repeated contact with the skin can entail irri-
tation or serious skin problems. Wash thoroughly with
soap and water. Avoid inhalation of grease fumes. Avoid
wearing clothing wetted with grease.
To Next Page
Loading...