SKE8-12-15-20
GB-0305.1
9 Overview of standards
EUROPEAN STANDARD
EN 292-1 : 1991
Safety of machinery - Basic concepts - General principles for design - Part 1: Basic terminology, methodology.
EN 292-2 : 1991/A1 : 1995
Safety of machinery - Basic concepts, general principles for design - Part 2: Technical principles and specifications.
EN 294 : 1992
Safety of machinery - Safety distances to prevent danger zones being reached by the upper limbs.
EN 349 : 1993
Safety of machinery - Minimum gaps to avoid crushing of parts of the human body.
EN 418 : 1993
Safety of machinery - Emergency stop equipment, functional aspects - Principles for design.
EN 811 : 1996
Safety of machinery - Safety distances to prevent danger zones being reached by the lower limbs.
EN 953 : 1997
Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards.
EN 1037 : 1996
Safety of machinery - Prevention of unexpected start-up.
EN 1050 : 1997
Safety of machinery - Principles for risk assessment.
EN 1088 : 1996
Safety of machinery - Interlocking devices associated with guards - Principles for design and selection.
EN 60204-1 : 1998
Safety of machinery - Electrical equipment of machines - Part 1: General requirements.
To Next Page
Loading...