Epomaker GK96S/SK96S Extended Manual Version 1.2
5. Select “Bluetooth” from the Settings. Make sure it is on.
6. Make sure that your device is considered discoverable.
7. Press “GK96S/SK96S KB” to connect to your Epomaker GK96S/SK96S.
8. When your device is connected to your iPhone, it should show as “Connected”.
Note: If you want to disconnect the device, you can press the information icon on the side, and
then select “Disconnect” or “Forget this device”. Your device will then be paired on that specific
button. To disconnect/reconnect the keyboard, press the same button until the button turns
white.
MacOS Bluetooth
Note: make sure your device is discoverable and turned on.
12
To Next Page
Loading...
