Epomaker GS66 Extended Manual Version 1.0
Setting Up Keyboard/Bluetooth
Windows 10 Bluetooth
1. First, charge the keyboard via a USB port on your computer until it has decent charge.
2. Power on the keyboard using FN + Space. This will put your Epomaker GS66 in
Bluetooth mode.
3. Long Press Either FN + Z, FN + X, or FN + C for about three seconds. The key will start
to flash red and green. This means that the keyboard is in pairing mode.
4. Press the windows key, and type “Bluetooth” into the search.
5. Select “Bluetooth and other device settings”
14
To Next Page
Loading...
