Eppendorf 5424 - Weight;Dimensions; Application Parameters

Technical data
Centrifuge 5424/5424 R
English (EN)
44
9.3 Weight/dimensions
Centrifuge 5424
Centrifuge 5424 R
*) The noise level was measured according to DIN EN ISO 3745 frontally in a sound measuring room with
accuracy class 1 at a distance of 1 m from the device and at lab bench height.
9.4 Application parameters
9.4.1 Centrifuge 5424
Tab. 9-1: Acceleration time and braking time according to DIN 58 970
These values were calculated for 230 V at 23°C.
Dimensions: Width: 236 mm (9.30 in.)
Depth: 320 mm (12.60 in.)
Height: 227 mm (8.94 in.)
Weight without rotor: 13.4 kg (29.5 lb)
Noise level: < 51 dB(A) *
Dimensions: Width: 290 mm (11.42 in.)
Depth: 480 mm (18.90 in.)
Height: 260 mm (10.24 in.)
Weight without rotor: 21.0 kg (46.3 lb)
Noise level: < 54 dB(A) *
Rotor Without soft ramp With soft ramp SOFT
Acceleration time Deceleration time Acceleration time Deceleration time
FA-45-24-11 15 s 16 s 24 s 28 s
run time 30 s to 9:59 h, infinitely (oo),
Adjustable to 10 min run time in 0.5 min
increments, then increments of 1 min
Relative centrifugal force (RCF) 1 to 20,238 x g (230 V, 100 V)
1 to 21,130 x g (120 V)
adjustable in 50 x g increments
RPM 100 rpm to 14,680 rpm (230 V, 100 V)
100 rpm to 15,000 rpm (120 V)
adjustable in 50 rpm increments
Maximum load 24 micro test tubes of 2.0 mL each.
Maximum kinetic energy 4070 Nm
Compulsory test log book No
Allowable density of the centrifuge material (at
maximum g-force/speed and maximum load)
1.2 g/mL