Need help?Do you have a question about the Eppendorf Concentrator plus and is the answer not in the manual?
Instructions on how to use the manual effectively and locate information.
Explanation of safety symbols and danger level classifications for warnings.
Lists and defines abbreviations used throughout the document.
Labeled diagrams of the complete system and basic device.
Highlights the key functionalities and design aspects of the device.
Details the components included in the device package.
Details the components included in the complete system package.
Details the components included in the basic device package.
Introduces the available rotors and their basic identification codes.
Lists fixed-angle rotors with their specifications like tubes, dimensions, and max g-force.
Details the swing-bucket rotor with its specifications.
Provides specific notes and usage details for certain rotors.
Specifies the proper and intended use of the device.
Defines the required qualifications for operating the device.
Outlines limitations and cautions for device operation.
Safety declaration related to potentially explosive atmospheres.
Information on the lifespan of accessories and parts.
Details conditions under which liability is transferred to the operator.
General safety instructions before using the device.
Warnings regarding electric shock, voltage, and handling.
Specific warnings about health, burns, spills, solvents, and condensation.
Safety instructions for operating and moving the device.
Safety guidelines for rotor installation and loading.
Precautions for using micro test tubes and handling potential damage.
Safety warnings related to vacuum operation and escaping substances.
Explains safety symbols found directly on the device.
Criteria for choosing a suitable installation site for the device.
Steps to prepare the device and its surroundings before installation.
Step-by-step guide to unpacking the device.
Instructions for safely removing the device from its packaging.
Procedure to remove transport screws from the complete system.
Guidance on placing the device in its final location.
Steps to verify completeness and check for transport damage.
Steps for connecting and setting up the instrument.
Basic installation requirements, including power and environmental factors.
Procedure for connecting the emission condenser to the complete system.
Instructions for connecting the gel dryer to the complete system.
Steps to connect an external vacuum pump to the basic device.
Details on connecting a vacuum pump with a power consumption up to 350 W.
Procedure for connecting a vacuum pump using an external power supply.
Identifies and explains the functions of the device's controls and display.
Describes the different modes (Concentrator, Desiccator, Centrifuge) and their applications.
Steps required before starting a concentration process.
Instructions for powering on the device and initial checks.
Detailed guide on how to properly insert rotors into the device.
Explains the importance and process of the device's warm-up phase.
Instructions for safely and symmetrically loading fixed-angle rotors.
Guidelines for symmetrical loading of swing-bucket rotors and plate handling.
Procedure for safely closing the device lid.
Core section detailing the concentration process and safety warnings.
How to perform concentration with a specified time duration.
How to perform concentration without a set time limit.
Actions that can be performed while the device is running or after it stops.
Steps to finalize a concentration application.
Procedure for removing the rotor and powering down the device.
Instructions for draining and emptying the emission condenser.
Specific handling and safety instructions for the A-2-VC rotor.
How to operate the device in desiccator mode.
Instructions for using the device with a connected gel dryer.
How to operate the device in centrifuge mode.
General maintenance guidelines for the device and its components.
Specific maintenance advice for the device body and parts.
Maintenance recommendations for the integrated diaphragm vacuum pump.
Steps to prepare the device and accessories for cleaning and disinfection.
Detailed procedures for cleaning and disinfecting the device and accessories.
Step-by-step guide for cleaning the main unit and its parts.
Instructions for cleaning and disinfecting rotors and accessories.
Procedures and precautions for handling glass breakage within the rotor chamber.
Instructions on how to safely replace the device's fuses.
Guidelines for decontaminating the device before shipping for service or disposal.
A table listing common errors, their causes, and remedies.
Lists specific error codes, causes, and recommended actions.
Procedure to manually release the lid during a power outage.
Guidelines and conditions for transporting the device.
Recommended conditions for storing the device.
Information and regulations regarding the proper disposal of the product.
Electrical specifications, including voltage, current, and fuses.
Specifies environmental requirements for operation.
Provides physical dimensions and weight of the device.
Technical specifications of the integrated vacuum pump.
Key parameters for device operation, such as run time and speed.
Lists part numbers for different complete system configurations.
Lists part numbers for the basic device configurations.
Part numbers and specifications for replacement fuses.
Lists and describes available accessories for the device.
Catalog numbers and descriptions for all available rotors.
Catalog numbers and descriptions for various adapters.
Catalog numbers and descriptions for additional accessories.
General| Brand | Eppendorf |
|---|---|
| Model | Concentrator plus |
| Category | Laboratory Equipment |
| Language | English |
To Next Page