Eppendorf Concentrator plus - 10.4.2 Adapters; 10.4.3 Other Accessories

59
Ordering information
Concentrator plus/Vacufuge® plus
English (EN)
10.4.2 Adapters
10.4.3 Other accessories
Order no.
(International)
Order no. (North
America)
Description
Work tray
for 96 × 0.2 mL PCR tubes, 5-/8-PCR tube strips and plates
without border
0030 124.235 951010031 set of 10 pieces
Frame for work tray
0030 124.243 951010049 set of 5 pieces
Adapter
used in A-2-VC
5825 706.005 022638963 CombiSlide Adapter, set of 2
Adapter
used in F-45-48-11 and F-45-70-11
5425 715.005 022636260 for 1 PCR tube (0.2 mL, max. Ø 6 mm), set of 6
5425 717.008 022636243 for 1 sample tube (0.4 mL, max. Ø 6 mm), set of 6
5425 716.001 022636227 for 1 sample tube (0.5 mL, max. Ø 6 mm) or 1 Microtainer
(0.6 mL, max. Ø 8 mm), set of 6
Order no.
(International)
Order no. (North
America)
Description
Spacer for simultaneous operation of two rotors
5301 316.005 022822101 for F-45-72-8 and F-45-48-11
Emission condenser
5301 330.008 022830309 without tube
Tube for emission condenser
5301 337.002 022830295 length: 0.7 m
Tube connection
5301 110.032 5301110032 Plastic
Special plug for external vacuum pump < 400 W
5301 010.003 - 230 V (Germany), different options upon request
5301 033.003 022830110 120 V, different options upon request
Solenoid valve for external vacuum pump
Only suitable for aqueous and alcoholic solvents.
5301 030.004 022830104 230 V, 50 – 60 Hz
5301 036.002 022830112 120 V
Sealing ring
5301 160.005 022830201 for lid
Pivot grease
5810 350.050 022634330 Tube 20 mL
Rotor feet for F-45-72-8 and F-45-48-11
5490 030.800 022830520 Set of 3