Need help?Do you have a question about the Eppendorf 5424 and is the answer not in the manual?
Instructions on how to use the operating manual and its accessibility.
Explanation of hazard symbols and danger levels used in the safety notes.
List of abbreviations and their full meanings used in the manual.
Defines the purpose and application of the centrifuge as an in-vitro diagnostic device.
Specifies that the device must only be operated by trained specialist staff.
Details restrictions, including ATEX directive relevance, and maximum service life for accessories.
Outlines conditions under which liability is transferred to the operator.
General safety instructions and warnings for operating the centrifuge and its components.
Describes safety symbols and their meanings found directly on the device.
Illustrations showing front and rear views of the Centrifuge 5424 and 5424 R.
Lists the items included in the delivery package for Centrifuge 5424 and 5424 R.
Highlights the key features, capacity, speed, and temperature control of the centrifuges.
Details the available rotors, their specifications, capacity, and notes.
Criteria for choosing a suitable installation location, considering safety and ventilation.
Prerequisites and steps for unpacking and preparing the centrifuge for installation.
Step-by-step guide for physically installing the centrifuge and connecting it.
Identifies and explains the function of each control on the centrifuge's keypad and display.
Presents the menu structure and functions available for configuring the centrifuge settings.
Provides a step-by-step guide on how to navigate and change settings within the device menu.
Covers the essential steps before starting a centrifugation run, including switching on and loading.
Details temperature adjustment, display, monitoring, FastTemp, and continuous cooling for the 5424 R model.
Explains different centrifugation modes: timed, continuous, and short-spin.
Guidelines for routine cleaning and disinfection preparation of the device and accessories.
Detailed procedures for cleaning and disinfecting the device and rotor, including safety precautions.
Specific maintenance tasks for the 5424 R model, including condensation tray and ventilation slits.
Describes the risks and procedures to follow in case of glass breakage within the rotor chamber.
Information on the location and replacement of fuses.
Instructions for decontaminating the device before shipping for repairs or disposal.
Lists common symptoms, their causes, and recommended remedies for device malfunctions.
Details specific error codes, their causes, and the corresponding solutions.
Procedure for manually opening the centrifuge lid if it cannot be opened normally.
Guidelines and precautions for safely transporting the centrifuge, including packaging.
Specifies the environmental conditions for storing the centrifuge, with and without packaging.
Information on the proper disposal of the electrical device according to EU regulations.
Details the electrical specifications, current consumption, EMC, and fuses for both models.
Specifies the recommended operating environment and conditions for the centrifuge.
Provides the physical dimensions, weight, and noise level of the centrifuges.
Lists application-specific parameters like acceleration, braking times, RCF, RPM, and load capacity.
Lists order numbers for different configurations of the Centrifuge 5424.
Lists order numbers for different configurations of the Centrifuge 5424 R.
Details available accessories such as rotors, rotor lids, and adapters with their order numbers.
Specifies the order numbers for replacement fuses.
General| Maximum Speed | 15, 000 rpm |
|---|---|
| Maximum RCF | 21, 130 x g |
| Temperature Control | No |
| Acceleration time to max. speed | 15 s |
| Capacity | 24 x 1.5/2.0 mL |
| Power Supply | 230 V, 50-60 Hz |
| Noise Level | < 54 dB(A) |
| Timer | 30 s to 99 min, with continuous run |
To Next Page