Eppendorf 5424 - Accessories

Ordering Information
Centrifuge 5424/5424 R
English (EN)
48
10.3 Accessories
10.3.1 Rotors and rotor lids
*) Aerosol impermeability tested and certified by the Centre of Emergency Preparedness and Response,
Health Protection Agency, Porton Down (UK).
10.3.2 Adapter
Order no.
(International)
Order no. 
(North America)
Description
Rotor FA-45-24-11
5424 702.007 022653008 aerosol-tight, aluminum, 45° angle, 24 places, max. tube
diameter 11 mm, incl. rotor lid (aluminum)
Replacement lid for rotor FA-45-24-11
5424 703.003 022653024 aerosol-tight, aluminum
Rotor FA-45-24-11-Special
5424 700.004 022653041 aerosol-tight, aluminum, PTFE-coated, 45° angle, 24 places,
max. tube diameter 11 mm, incl. rotor lid (aluminum)
Replacement lid for rotor FA-45-24-11-Special
5424 701.000 022653067 aerosol-tight, aluminum, PTFE-coated
Rotor F-45-18-11-Kit
5424 706.002 022653083 aluminum, 45° angle, 18 places, max. tube diameter 11 mm,
incl. rotor lid (polypropylene)
Spare lid for rotor F-45-18-11-Kit
5424 707.009 022653105 Polypropylene
Rotor F-45-32-5-PCR
5424 704.000 022653121 incl. rotor lid (aluminum)
Spare lid for rotor FA-45-32-5-PCR
5424 708.005 022653148 aluminum
Order no.
(International)
Order no. 
(North America)
Description
Adapter
used in FA-45-24-11, FA-45-24-11-Special and F-45-18-11-Kit
5425 715.005 022636260 for 1 PCR tube (0.2 mL, max. Ø 6 mm), set of 6
5425 717.008 022636243 for 1 sample tube (0.4 mL, max. Ø 6 mm), set of 6
5425 716.001 022636227 for 1 sample tube (0.5 mL, max. Ø 6 mm) or 1 Microtainer
(0.6 mL, max. Ø 8 mm), set of 6