Need help?Do you have a question about the Eppendorf Reference 2 and is the answer not in the manual?
Provides guidance on how to effectively use the operating manual.
Explains the meaning of safety symbols and danger levels used throughout the manual.
Defines various symbols and their corresponding meanings for clarity.
Specifies the designated purpose and application scope of the Reference 2 pipette.
Highlights critical safety warnings and precautions for proper operation.
Details the main characteristics and functionalities of the Eppendorf Reference 2 pipette.
Lists all items included in the standard product delivery package.
Provides a visual guide identifying key components of the pipette.
Outlines the materials used in the construction of the pipette's components.
Step-by-step instructions for accurately setting the desired volume on the pipette.
Guide on the correct procedure for attaching pipette tips.
Recommends optimal immersion depths for consistent and accurate liquid aspiration.
Detailed steps for performing the standard forward pipetting technique.
Instructions for utilizing the reverse pipetting method for specific liquid types.
Guidance on appropriate methods for storing the pipette when not in use.
Solutions for common issues encountered with the pipette's control button.
Troubleshooting common problems encountered during the liquid dispensing process.
Solutions for issues related to pipette tip fit and compatibility.
Troubleshooting problems associated with the pipette's tip cone.
Step-by-step guide for disassembling the single-channel pipette up to 1000 µL.
Step-by-step guide for disassembling the single-channel pipette from 2 mL upwards.
Step-by-step guide for assembling the single-channel pipette up to 1000 µL.
Step-by-step guide for assembling the single-channel pipette from 2 mL upwards.
Procedure for replacing the protection filter in pipettes of 2 mL and above.
Steps to disassemble the multi-channel pipette.
Detailed instructions for removing a channel from a multi-channel pipette.
Steps for assembling the lower part of a multi-channel pipette.
Guide on how to replace the O-ring on the pipette.
Instructions on how to turn off the tip cone spring loading feature.
Specific steps to deactivate spring load for single-channel pipettes ≤ 1000 µL.
Specific steps to deactivate spring load for multi-channel pipettes.
Information on performing pipette adjustments (user and factory).
Comprehensive guide for cleaning and disinfecting the entire pipette.
Specific instructions for cleaning and disinfecting the pipette's lower section.
Method for sterilizing the pipette using UV light irradiation.
Procedure and precautions for autoclaving the pipette.
Detailed steps and prerequisites for autoclaving the pipette.
Instructions for decontaminating the device prior to shipping or storage.
Table detailing volume increments for various pipette models.
Specifies recommended temperature and humidity for storage and operation.
Presents measurement deviation data for fixed-volume single-channel pipettes.
Presents measurement deviation data for variable-volume single-channel pipettes.
Presents measurement deviation data for multi-channel pipettes.
Describes the conditions and methods used for performance testing and analysis.
Lists order numbers for variable volume single-channel pipettes by model.
Lists order numbers for fixed volume single-channel pipettes by model.
Lists order numbers for multi-channel pipettes by model.
Information on how to order replacement parts and accessories.
General| Ergonomic Design | Yes |
|---|---|
| Volume Range | 0.1 µL to 10 mL |
| Volume Increments | 0.1 µL |
| Material | stainless steel |
| Autoclavable | Yes, fully autoclavable |
| Dimensions | Varies by model |
| Power Supply | Not applicable (manual pipette) |
| Precision | ≤ 0.2% (10 µL - 10, 000 µL), ≤ 0.5% (0.1 µL - 10 µL) |
| Adjustment | Easy Calibration technology |
To Next Page