12
Product description
Eppendorf Reference
®
2
English (EN)
3.4 Materials
The components of the pipette which can be accessed by the user are made of the
following materials:
NOTICE! Aggressive substances may damage the pipette, pipette tip and
accessories.
Check the resistance to chemicals before using organic solvents or aggressive
chemicals.
Only use liquids whose vapors do not corrode the used materials.
Observe the cleaning instructions.
Assembly Material
External surfaces of the upper part • Improved polypropylene (PP)
• Polycarbonate (PC)
• Polyetherimide (PEI)
• Stainless steel
Viewing window • Polycarbonate (PC)
Exterior and interior of lower parts • Improved polypropylene (PP)
•Polyvinylidene fluoride (PVDF)
• Polyetherimide (PEI)
• Polyphenylene sulfide (PPS)
• Polyetheretherketone (PEEK)
• Polytetrafluoroethylene (PTFE)
• Ethylene propylene diene rubber (EPDM)
•Silicone
• Steel (stainless steel and spring steel)
You can find information on the resistance to chemicals on our website
www.eppendorf.com/manuals
.
To Next Page
Loading...