Eppendorf Concentrator plus - 9.4 Diaphragm Vacuum Pump of the Complete System; 9.5 Application Parameters

Technical data
Concentrator plus/Vacufuge® plus
English (EN)
56
9.4 Diaphragm vacuum pump of the complete system
9.5 Application parameters
Max. current: 1.4/1.6 A (230 V, 50/60 Hz)
3.0 A (120 V, 50 Hz)
3.6/3.8 A (100 V, 50/60 Hz)
Max. power: 180 W (230/120/100 V)
Motor protection: Thermal winding protection
Protection class according to IEC 529: IP 54
Suction capacity (in accordance with DIN EN
60529; VDE 0470-1):
1.9/2.1 m
3
/h (50/60 Hz)
Achievable ultimate pressure (absolute): <20 mbar
Max. permissible pressure at the outlet (absolute): 2 bar
Max. differential pressure between inlet and outlet: 1 bar
Maximum speed at 50/60 Hz: 1,500/1,800 rpm
Radio interference protection class: B
Materials of the surfaces that are in contact with the medium
Inner part of housing cover: PTFE, with carbon reinforcement
Head cover, diaphragm clamping disk: ETFE, with carbon reinforcement
Valve: FFKM
Diaphragm: PTFE
Inlet: ETFE
Outlet: ETFE
Screw connection: ETFE
Hose: PTFE
Run time: 1 min to 9:59 h, unlimited (oo),
adjustable in 1 min. increments.
Rotational speed: 1,400 rpm, not adjustable
Max. relative centrifugal force
(RZB or rcf):
248 x g, not adjustable
Max. load: 144 tubes/2 microplates (0.2 to 50 mL)
Permissible density of the material for centrifuging
(at max. g-force/speed and max. load):
1.2 g/mL
Emission condenser volume: 280 mL