Product description
Concentrator plus/Vacufuge® plus
English (EN)
10
2.2 Features
The Concentrator plus/Vacufuge plus is a device for evaporating liquid or moist samples in micro test tubes,
round-bottom tubes, conical tubes, flat-bottom tubes and various plates.
You can, for example, insert the following tubes and plates:
•1.5 and 2.0 mL micro test tubes in a rotor with 70 places.
•0.5 mL micro test tubes in a rotor with 72 places.
•15 mL conical tubes in a rotor with 8 places.
•50 mL conical tubes in a rotor with 6 places.
•MTP and PCR plates in a swing-bucket rotor.
A complete list can be found in the following chapter (see Rotors on p. 12).
The device is available as a complete system with integrated diaphragm vacuum pump or as a basic device
without vacuum pump. The basic device can be connected to an external vacuum system.
Key practical functions of the Concentrator plus/Vacufuge plus have been optimized:
•3 temperature levels can be set (30, 45, 60 °C). Alternatively, evacuation is carried out without
temperature control.
•The evaporation of liquids can be carried out optimized in 3 functions. In addition to pure evacuation,
aqueous and/or alcoholic solutions can be concentrated extra fast with 2 special functions.
•You can also operate the device as a pure desiccator.
•You can connect a solvent trap to the device behind the pump.
Due to the space-saving design, the device can be placed directly on the workstation. With its clearly
laid-out control panel with only a few, clearly marked elements and a display that is easy to read, the device
is a pleasant and reliable companion in your daily work.
1Pump outlet (complete system)
Outlet of the integrated diaphragm vacuum
pump, e.g., for hose connection to the emission
condenser.
2PMMA lid
3Sealing ring
4Grip recess
5Emergency release
6Pump housing (complete system)
7Name plate
8Mains/power connection
9Fuse holder
10 Mains/power switch
11 Operating controls and device display
12 Emission condenser (complete system)
13 Pump connection (basic device)
For hose connection to external vacuum pump.
14 Mains/power connection for external vacuum
pump (basic device)
To Next Page
Loading...