Eppendorf 5804 - Interface Parameters and Control Codes

Centrifuge 5804/5804 R and 5810/5810 R
10 Descriptions
10-14 Descriptions
Interface parameters of Centrifuges 58xx
Control codes
CNR Name Value range Access Description
1 STW1 binary 8 W Control word
5 ZUW1 0..6 R Drive status
6 ZUW2 0..8 R Machine status
7 ZUW3 binary 8 R General status
10 N_S 200..NMAX R/W Nominal rotational speed value
11 RCF_S 10..fkt (NMAX,RAD) R/W Nominal rcf value
12 TIME_S 0..99 R/W Nominal time value (0=continuous run)
13 TEMP_S –9..40 R/W Nominal temperature value
14 ROTNR 1..20 R/W Rotor number
15 RADIUS 10..RAD R/W Radius for rcf calculation
16 ACCEL 0..9 R/W Acceleration level
17 BRAKE 0..9 R/W Deceleration level, 0=free deceleration
20 N_I 0..14000 R Rotational speed list value
21 RCF_I 10..20800 R Actual rcf value
22 TIME_I 0..99 R Actual time value
23 TEMP_I –15..50 R Actual temperature value
30 NMAX R Nominal rotational speed of rotor
31 NAB R Cut-off speed of rotor
32 RAD R Max. radius of rotor
40 BSTD 0...65000 R Operating hours
41 FENR 0..25 R Error number
42 VERSNR 0..99 R Software version number
MSTM/KW/0408