Spare parts list 7-11
Centrifuge 5804/5804 R and 5810/5810 R
7 Spare parts list
Fig. Pos. Designation
5804
5804 R
5810
5810 R
Part no.
1 Drive
2 1-1 Motor for 230-V version x x x x 5810 302.005
2 1-1 Motor for 202-V version x x x x 5810 306.000
2 1-1 Motor for 120-V version x x x x 5810 305.004
5 1-2 Insulating flange (below motor cap) x x x x 5810 001.021
5 1-3 Motor cap complete with rotational speed sensor x x x x 5820 850.329
5 1-4 Screw set for motor cap x x x x 5820 850.280
5 1-5 O-ring, 40x1 x x 0113 002.042
6 1-6 Sleeve x x 5811 001.017
2 1-7 Shock mount for motor (set of 3) x x x x 5820 850.418
2 1-8 Fastening set for shock mount x x x x 5810 855.330
9 1-9 Holder f. magnet of imbalance detection
with magnet approx. 9x13 mm
x x x x 5811 855.512
1-9 Ferrite bead x x 0013 599.912
2 Brake resistors
3 2-1 Brake resistor 230 V / 202 V (per pce.) x x x x 0113 201.207
3 2-1 Brake resistor 120 V (per pce) x x x x 0113 202.785
3 Fan
3-1 Fan for frequency converter 230 V x 0113 202.831
3-1 Fan for frequency converter 120 V x 0113 202.823
3-2 Fan for motor 230 V / 202 V (base plate) x x 5821 850.071
3-2 Fan for motor 120 V (base plate) x x 5821 850.080
4 3-3 Fan for condenser 230 V / 202 V x x 5821 850.144
4 3-3 Fan for condenser 120 V x x 5821 850.152
4 Accessories
4-1 Fuses 10 A slow blow x x 5811 352.006
MSTM/0408