57
14 Ordering information
Please use only the accessories recommended by Eppendorf. Using disposables which we have not
recommended can reduce the precision, accuracy and life of the device. We do not honor any warranty or
accept any responsibility for damage resulting from such action.
Order no. Description
Mastercycler
®
5333 000.018 230 V, 50–60 Hz
5333 000.026 115 V, 50–60 Hz
5333 000.034 100 V, 50–60 Hz
Mastercycler
®
gradient
5331 000.010 230 V, 50–60 Hz
5331 000.045 115 V, 50–60 Hz
5331 000.037 100 V, 50–60 Hz
Accessories
0013 609.349 Fuse, time-lag, 5 A, 250 V (1 pc.) for 230 V
0013 565.333 Fuse, time-lag, 6.3 A, 250 V (1 pc.) for 115 V
0013 611.432 Fuse, semi time-lag, 8 A, 250 V (1 pc.) for 100 V
5331 350.011
in situ
Adapter
5331 900.011 Operating manual in German and English
for Mastercycler
®
and Mastercycler
®
gradient
5332 300.018 Personal card
5331 226.027 Personal card for temperature-validation system
5331 225.004 Surface temperature sensor for
in situ
Adapter *
5331 222.005 Temperature-validation system
5331 224.008 Temperature sensor for 0.2 ml tube positions
5331 223.001 Temperature sensor for 0.5 ml tube positions
Consumables
0030 127.498 Cap Strips (8-strips) (25 x 12 pcs.)
0030 127.650 Heat Sealing Film (100 sheets)
0030 127.633 Heat Sealing Foil (100 sheets)
0030 127.501
in situ
Frames, 25
µ
l (100 pcs.)
0030 127.510
in situ
Frames, 65
µ
l (100 pcs.)
0030 127.528
in situ
Frames, 125
µ
l (100 pcs.)
0030 127.536
in situ
Frames, 300
µ
l (100 pcs.)
0030 127.307 PCR plate 96, colorless (25 pcs.)
(different colors available; see General Catalogue)
0030 127.056 PCR plate 96, low volume, colorless (25 pcs.)
(different colors available; see General Catalogue)
0030 127.374 PCR plate 96, skirted, colorless (30 pcs.)
(different colors available; see General Catalogue)
*
Minimum software requirement for
in situ
reactions: Version 2.0
14 Ordering information
To Next Page
Loading...