10
3. Operation
3.1 Connecting NAVY Battery to NAVY Outboard
When connecting an ePropulsion NAVY Battery to the outboard, make sure
the battery switch and the main switch on the power cable are both off.
Then refer to Figure 3-1 and follow the below procedures:
①
Connect the main switch cables to the battery. Refer to Figure 3-1.
②
Connect the main switch cables with the power cables from the outboard
motor.
③
Using the 5m communication cable to connect NAVY 6.0R outboard motor
with NAVY Battery.
Figure 3-1
Avoid battery short-circuit during connection.
The outboard motor will stop working once the communication cable or
power cable disconnects.
To Next Page
Loading...
