6
Usage
The DM-D500 can be used with the following equiment.
❏ IR Series. You can attach the DM-D500 to the IR Series using the
“DM-D pole unit for IR” (DP-504). (See page 8.)
❏ TM-H5000II/TM-J8000 printers. You can attach the DM-D500 to
TM-H5000II/TM-J8000 printers using the “DM-D pole unit for TM
printers (Type B)” (DP-503). (See page 10.)
❏ TM-U375/TM-U950. You can attach the DM-D500 to the TM-U375/
TM-U950 printers using the “DM-D pole unit for TM printers
(Type A)” (DP-502). (See page 13.)
❏ TM-H6000/TM-U675. You can attach the DM-D500 to TM-H6000/
TM-U675 printers using the “DM-D pole unit for TM printers
(Type A)” (DP-502). (See page 16.)
❏ Other TM printers. You can attach the DM-D500 using the “DM-D
pole unit for TM printers (Type A)” (DP-502) and Velcro tapes or
screws. (See page 21.)
❏ DM-D stand. You can attach the DM-D500 to the DM-D stand
directly using the “DM-D stand unit for DM-D500” (DP-501). When
using the DM-D stand, an optional power supply unit (PS-170) is
required. Also, if you want to extend the length of the DM-D500, an
optional extension support unit (DP-105) is required. (See page 24.)
To Next Page
Loading...
