Attaching to Other TM Printers
When using with other TM printers, the DM-D500 can be attached to a
desk or other surface, using the “DM-D pole unit for TM printers
(Type A)” (DP-502), and Velcro tapes or screws.
Required items
The following items are used when the DM-D500 is used with other
TM printers. These items are packed with the “DM-D pole unit for TM
printers (Type A)” (DP-502).
Assembling steps using Velcro tapes
1. Attach Velcro tapes to the bottom of fixing plate A.
fixing plate A
fixing screws for
wood position
Velcro tapes
Velcro tapes
support C
support B (for extension)
To Next Page
Loading...
Need help?
General
