12 Loading Paper
Loading Roll Paper
You can load roll paper in these sizes:
■ 4 inches wide
■ 8.3 inches wide
■ 13 inches wide
1. Place the roll paper on the holders as
shown, then remove the tape and
protective paper from the end of the roll.
2. Make sure the end of the paper is cut
straight across, with 90° corners. If the
end is cut diagonally, you may have
problems feeding the paper.
3. If the paper curls at the end, roll it
backwards between a folded sheet of
paper to uncurl it.
Avoid touching the printable surface of
the roll paper.
4. Remove any paper that’s in the sheet
feeder at the top of the printer. Then
remove the paper support, lower the
output tray, and turn on the printer.
To Next Page
Loading...
