Printing From Start to Finish 35
Macintosh OS X
1. Start your print application, open your photo file, and resize it as necessary.
2. Click File > Page Setup.
3. Select one of the following as the Format for setting:
■ Stylus Photo 2200(Roll Paper)
■ Stylus Photo 2200(Roll Paper - Borderless)
■ Stylus Photo 2200(Roll Paper - Borderless Banner)
4. Select the photo size as the Paper Size setting.
Caution: When printing borderless photos, select one of the supported paper
sizes listed on page 43; never select a custom or unsupported paper size or ink
may spray inside your printer.
5. Click OK to close the Page Setup dialog box.
6. Click File > Print to open the printer settings dialog box.
Select a Stylus Photo 2200 Roll
Paper setting for your printer here
Select the size of the photo you’re
printing here
To Next Page
Loading...
