14 Loading Paper
8. Push the paper into the feeder as far as it
will go; the printer feeds the paper
automatically.
9. To verify that the paper is loaded
straight, open the printer cover and look
into the printer.
If the paper is crooked, press the z roll
paper button for three seconds to back
the paper all the way out.
Then turn the roll paper holder knobs to
roll up the paper. Press the z roll paper
button to clear the paper out error.
Repeat steps 7 through 9 to reload the
paper.
If you want to use the cutter, follow the steps on page 15 to install it.
If not, follow the instructions on page 32 to print on roll paper.
If crooked, press
z button for three seconds
To Next Page
Loading...
