Epson 800 - Control Codes

Technical Specifications
B-8
Control Codes
ESC/P 2 control codes See the ESC/P
®
Reference Manual for more information about these
commands.
General operation:
ESC@, ESC U, ESC EM
Paper feeding:
CR, FF, LF, ESC 0, ESC 2, ESC 3, ESC +
Page format:
ESC ( C, ESC C, ESC C 0, ESC Q, ESC l, ESC ( c, ESC N, ESC O
Print position motion:
ESC $, ESC \, ESC ( V, ESC ( v, ESC D, HT, ESC B, ESC J, VT
Font selection:
ESC k, ESC x, ESC X, ESC P, ESC M, ESC g, ESC p, ESC 4, ESC 5,
ESC E, ESC F, ESC !
Font enhancement:
ESC W, DC 4, SO, DC2, SI, ESC w, ESC G, ESC H, ESC T,
ESC S, ESC -, ESC ( -, ESC q
Spacing:
ESC Space, ESC c, ESC ( U
Character handling:
ESC t, ESC ( t, ESC R, ESC %, ESC &, ESC :, ESC 6, ESC 7,
ESC ( ^
Bit image:
ESC *
Graphics:
ESC ( G, ESC ., ESC ( i, ESC ( e, ESC ( \, ESC ( s
Color:
ESC r, ESC ( r
Printing mode:
ESC ( K
IBM X24E emulation
control codes
This printer emulates the IBM Proprinter with the following
commands. For detailed information, see IBM’s X24E reference
manual.
General operation:
NUL, DC3, ESC j, BEL, CAN, DC1, ESC Q, ESC [ K, ESC U
Paper feeding:
FF, LF, ESC 5, ESC A, ESC A (AGM*), ESC 0, ESC 1, ESC 2,
ESC 3, ESC 3 (AGM*), CR
Page format:
ESC C, ESC X, ESC N, ESC O, ESC 4
easapb.fm5 Page 8 Tuesday, January 14, 1997 9:54 AM