(13/22)
EPSON AcuLaser C4000 Quick Reference
Printing and Deleting Reserve Job Data
Print jobs stored on the printer’s Hard Disk
Drive using the Re-Print Job, Verify Job, and
Stored Job options of the Reserve Job
function can be printed and deleted using
the control panel’s Quick Print Job Menu.
Jobs saved using the Confidential Job option
can be printed from the Confidential Job
Menu. Follow the instructions in this section.
Using the Quick Print Job Menu
Follow these steps to print or delete Re-Print
Job, Verify Job, and Stored Job data.
1. Make sure the LCD panel displays Ready
or Standby, then press the Enter
button to access the control panel menus.
2. Press the Down button repeatedly
until Quick Print Job Menu appears on
the LCD panel, then press the Enter
button.
3. Use the Down or Up button to
scroll to the appropriate user name, then
press the Enter button.
4. Use the Down or Up button to
scroll to the appropriate job name, then
press the Enter button.
5. To specify the number of copies you
want to print, press the Enter
button, then use the Down and
Up buttons to select the number of
copies.
To delete the print job without printing
any copies, press the Down button
to display Delete on the LCD panel.
6. Press the Enter button to start
printing or to delete the data.
Using the Confidential Job Menu
Follow these steps to print or delete
Confidential Job data.
1. Make sure the LCD panel displays Ready
or Standby, then press the Enter
button to access the control panel menus.
2. Press the Down button repeatedly
until ConfidentialJobMenu appears on
the LCD panel, then press the Enter
button.
3. Use the Down or Up button to
scroll to the appropriate user name, then
press the Enter button.
4. Enter your 4-digit password by using the
corresponding buttons, as shown below.
Note:
❏ Passwords are always 4 digits.
❏ Passwords consist of numbers from 1
through 4.
1
To Next Page
Loading...
