(3/22)
EPSON AcuLaser C4000 Quick Reference
How to use the menus
1. Make sure the Ready light is on, then
press any of the buttons indicated above
to access the menus.
2. Use the Up and Down buttons
to scroll through the menus.
3. Press the Enter button to view the
items in a menu. Depending on the
menu, the LCD panel displays an item
and the current setting separated by an
asterisk (YYYY
*ZZZZ), or only an item
(YYYY).
4. Use the Up and Down buttons
to scroll through the items, or press the
Back button to return to the
previous level.
5. Press the Enter button to carry out
the operation indicated by an item, such
as printing a status sheet or resetting the
printer; or to view the settings available
for an item, such as paper sizes or
emulation modes.
Use the Up and Down buttons
to scroll through available settings, and
press the Enter button to select a
setting and return to the previous level.
Press the Back button to return to
the previous level without changing the
setting.
Note:
You need to turn the printer off and then on
to activate some settings. For details, see
“Control Panel Menus” in the Reference
Guide.
6. Press the N Start/Stop
button to exit the
control panel menus.
To Next Page
Loading...
