13. Plug the connector of the Duplex Unit into the socket on the printer.
14. Install the connector cover that comes with the Duplex Unit.
15. Reconnect the interface cable and power cord, then turn the printer on.
To confirm that the option is installed correctly, print a Status Sheet. See “Printing a Configuration
Status Sheet” on page 195.
Note for Windows users:
If EPSON Status Monitor is not installed, you have to make settings manually in the printer driver. See
“Making Optional Settings” on page 217.
EPSON AcuLaser C9200 Series User's Guide
Installing Options 143
To Next Page
Loading...
