Epson AcuLaser C9200 Series - Network Menu; AUX Menu; PCL Menu

Buffer Size
Determines the amount of memory to be used for receiving data and printing data. If Maximum is
selected, more memory is allocated for receiving data. If Minimum is selected, more memory is
allocated for printing data.
Note:
❏ To activate Buffer Size settings, you must turn off the printer for more than five seconds then
turn it back on. Or, you can perform a Reset All operation, as explained in “Reset Menu” on page
91.
❏ Resetting the printer erases all print jobs. Make sure the Ready light is not flashing when you reset
the printer.
Network Menu
See the Network Guide for each setting.
AUX Menu
See the Network Guide for each setting.
PCL Menu
These settings are available in the PCL mode.
Item Settings (default in bold)
FontSource
Resident, Download
*1
Font Number
0… 65535 (depending on your settings)
Pitch
*2
0.44 …10.00… 99.99 cpi in 0.01 cpi increment
Height
*2
4.00 …12.00… 999.75 pt in 0.25 pt increment
SymSet
IBM-US, Roman-8, Roman-9, ECM94-1, 8859-2 ISO, 8859-9 ISO, 8859-10ISO, 8859-15ISO,
PcBlt775, IBM-DN, PcMultiling, PcE.Europe, PcTk437, PcEur858, Pc1004, WiAnsi, WiE.Europe,
WiTurkish, WiBALT, DeskTop, PsText, VeInternati, VeUS, MsPublishin, Math-8, PsMath, VeMath,
PiFont, Legal, UK, ANSI ASCII, Swedis2, Italian, Spanish, German, Norweg1, French2, Windows,
McText, Hebrew7, 8859-8 ISO, Hebrew8, Arabic8, OCR A, OCR B, Pc866Cyr, Pc866Ukr, WinCyr,
ISOCyr, Pc8Grk, Pc851Grk, WinGrk, ISOGrk, Greek8, Pc862Heb, Pc864Ara, HPWARA
EPSON AcuLaser C9200 Series User's Guide
Using the Control Panel 95