Wireless Network Installation 13
Select WPA Security Settings
1. Use the arrow buttons on the printer’s control panel to enter your WPA
passphrase. Press the
x Menu button to switch between uppercase, lowercase,
or numeric/special characters.
Important:
WPA passphrases are case-sensitive. Be sure to enter upper- or lowercase letters
as necessary.
■ Press x Menu to switch between uppercase (ABC), lowercase (abc), or
numeric/special (
123) characters.
■ Press u or d until you see the character you want.
■ Press l or r to move the cursor.
■ Press – to delete a character.
2. When you’re done entering the WPA passphrase, press
OK.
3. Continue with “Confirm Your Network Settings” on page 15.
Indicates current selection. Press the x Menu
button to switch between uppercase, lowercase,
or numeric/special characters.
From the printer’s control panel:
Press u or d to select a character.
Press l or r to move the cursor.
Press – to delete a character.
Press OK when done.
To Next Page
Loading...
