14 Wireless Network Installation
Select WEP Security Settings
1. Press u or d to select Alphanumeric if your WEP key is ASCII, or select
Hexadecimal if your WEP key is in hexadecimal format.
Note:
If the WEP key is 5 or 13 characters, it’s ASCII. If the WEP key is 10 or 26
characters, it’s hexadecimal.
2. Use the arrow buttons on the printer’s control panel to enter your WEP key.
Press the
x Menu button to switch between uppercase, lowercase, or numeric
characters.
Important:
WEP keys in ASCII format are case-sensitive. Be sure to enter upper- or lowercase
letters as necessary.
Indicates current selection. Press the x Menu
button to switch between uppercase, lowercase,
or numeric characters.
From the printer’s control panel:
Press u or d to select a character.
Press l or r to move the cursor.
Press – to delete a character.
Press OK when done.
To Next Page
Loading...
