131
Maintenance
Running it using the control panel on the product
1
Turn on the power of this product.
2
Press the [MENU] button.
The top menu appears.
3
Use the ▲/▼ buttons to display the maintenance screen, and then press the button.
4
Use the ▲/▼ buttons to display [Nozzle Check], and then press the button.
5
When the nozzle check confirmation screen appears, press the button.
The disc on which the nozzle check pattern was printed is output to Stacker 3 or Stacker 4.
See “Checking the nozzle check results” on page 132 in this guide for how to check the nozzle check results.
To Next Page
Loading...
