66
[Utility] screen
In the [Utility] screen, you can run various maintenance functions to maintain the print quality as well as make
settings for running the printer driver.
Nozzle Check
Allows you to print a pattern for checking if the print head is clogged. Check
the printed pattern to see whether or not the print head is clogged.
See “How to perform a nozzle check” on page 130 in this guide for details on
how to use this function.
Head Cleaning
Allows you to clean the print head. Run this when the print head is clogged.
See “How to clean the print head” on page 134 in this guide for details on how
to use this function.
Print Head Alignment
Adjusts the alignment when the printing results show gaps in vertical lines or
appear blurry.
See “Print head alignment” on page 136 in this guide for details on how to use
this function.
Correcting the Printing
Position
Allows you to adjust the printing position up, down, left, or right. Run this if you
have checked the printing results on your CD/DVD and found that the printing
position has shifted.
See “Correcting the printing position” on page 138 in this guide for details on
how to use this function.
To Next Page
Loading...
