107
Chapter 6 Replacement of the TM-T88V
6
Additional Functions and Functional Improvements
Print Speed
The default printing speed for the TM-T88VI may vary depending on the specification.
* The values are those when the paper width is set to 80 mm. When it is set to 58 mm, the maximum is 300 mm/
s {11.8"/s}.
Interface
In addition to UIB, the printer is equipped with a standard USB interface and a wired LAN interface. You can
perform printing using numerous interfaces.
SimpleAP Function
The TM-T88VI comes with a mode (SimpleAP) that allows the printer to connect directly when using an
optional wireless LAN unit without having to use a wireless LAN access point.
NFC
The TM-T88VI is equipped with a built-in NFC tag.
Epson TM Utility for iOS/Android
The TM-T88VI allows you to make a variety of settings using the Epson TM Utility for iOS/Android for smart
devices running iOS/Android.
TM-T88VI TM-T88V
Default
Up to 300 or 350 mm/s Up to 300 mm/s
Maximum print speed
350 mm/s* 300 mm/s
Print speed setting
(Customized value)
Level 1 to 14 Level 1 to 13
Depending on print conditions such as print duty, print head temperature, and data transmission
speed, print speed is automatically adjusted.
The SimpleAP function is for making settings only.
When UB-R04 is installed, you cannot use the printer's built-in NFC. Install the NFC tag for the UB-R04
at a location that is remote from the printer's built-in NFC.
To Next Page
Loading...
