32
Connecting the AC adapter
Use the Epson PS-180 or an equivalent product as the AC adapter.
Connecting the AC adapter
1
Make sure the printer is turned off.
2
Connect the AC cable to the AC adapter.
3
Connect the DC cable of the AC adapter to the power supply connector (stamped
24V).
WARNING
Never insert the AC cable plug into a socket that does not meet the input voltage of the AC
adapter.
Doing so may result in damage to the printer.
Should a fault ever occur, immediately turn off the power to the printer and unplug the AC
cable from the socket.
The optional power supply box (OT-BX88VI) is available. You can store the power supply unit in
the box attached to the printer.
To Next Page
Loading...
