19
Chapter 1 Product Overview
1
Connectors
All connectors are located on the lower rear of the printer.
The installed interface varies depending on the model.
Do not insert a Type-B USB connector into the LAN connector or the drawer kick connector. If it
is inserted, the connector, printer, and the system may malfunction.
If using the drawer kick connector and a serial/parallel connector simultaneously, we recommend
using either of the cables below to prevent the cables from interfering with one another.
* Flat-type drawer kick cable
* Serial/parallel cable with a connector (from the tip to the screw) that is within 34 mm {1.34"}.
1 Drawer kick connector Connects the cash drawer or the optional external buzzer.
See
"Connecting the Cash Drawer" on page 41, and "Connecting the Optional External
Buzzer" on page 44
.
2 Ethernet connector Connects the 10BASE-T/100BASE-TX ethernet cable.
3 Serial interface Connects the serial cable for connecting to a computer.
4 Parallel interface Connects the parallel cable for connecting to a computer.
5 USB Plus Power Interface Connects the USB Plus Power cable for connecting to a computer.
6 Power supply connector Connect the AC adapter.
See
"Connecting the AC adapter" on page 32.
7 USB connector Use only for connecting optional Wireless LAN unit and customer display.
8 USB connector
(Type B)
Connects the USB cable for connecting to a computer.
See
"Connecting the Printer to the Host" on page 33.
Within 34 mm {1.34"}