Epson C31CE94061N - Printing Specifications

110
 : According to our operation conditions
Printing Specifications
dpi: dots per inch
*1: when the printer prints text (built-in fonts) with the default print density level at 24V and 25°C {77°F}.
*2: The values are those when the paper width is set to 80 mm. When it is set to 58 mm, 300 mm/s {11.8"/s}
maximum.
Overall dimensions 145 × 195 × 148 mm {5.71 × 7.68 × 5.83"} (W × D × H)
Mass Approx. 1.6 kg {3.5 lb} (roll paper excluded)
Printing method Thermal line printing
Dot density 180 × 180 dpi
Printing direction Unidirectional with friction feed (Reverse feed is not
supported.)
Printing width Standard column mode 80 mm width paper printing: 72.0 mm (2.83"), 512 dots
58 mm width paper printing: 50.8 mm (2.0"), 360 dots
48 column mode 80 mm width paper printing: 67.7 mm (2.67"), 480 dots
58 mm width paper printing: 50.8 mm (2.0"), 360 dots
Characters per
line
Standard
column mode
ANK font A 80 mm width paper printing: 42
58 mm width paper printing: 30
ANK font B 80 mm width paper printing: 56
58 mm width paper printing: 40
Kanji font A 80 mm width paper printing: 21
58 mm width paper printing: 15
Kanji font B 80 mm width paper printing: 32
58 mm width paper printing: 22
Special font A 80 mm width paper printing: 42
58 mm width paper printing: 30
Special font B 80 mm width paper printing: 56
58 mm width paper printing: 40
48 column
mode
ANK font A 80 mm width paper printing: 48
58 mm width paper printing: 36
ANK font B 80 mm width paper printing: 53
58 mm width paper printing: 40
Maximum print speed*
1
350 mm/s*
2
Line spacing 4.23 mm {1/6"} (Default value, programmable by command)
Print speed may be slower, depending on such items as the data transmission speed.